
Manatee County · about 20 min (11 mi) from the shop
Kitchen Remodeling in South Bradenton, FL
Refacing, single-cabinet repairs and new custom kitchens for the block homes and villas between Bradenton and Bayshore Gardens.
- Built in our Sarasota shop since 2011
- 4.4★ from 52 Google reviews
- 3D model before anything is built
- Solid-wood boxes, dovetail drawers
We offer kitchen remodeling in South Bradenton, the unincorporated band of neighborhoods just below Bradenton's city limits, from cabinet refacing and repairs to full custom kitchens. Our Lewis Ave shop is roughly 20 minutes and 11 miles away, a straight run north on US 41 or US 301.
Two things set this area apart. Permits go to Manatee County rather than the city, whatever the mailing address says. And many owners here would rather fix or reface a sturdy kitchen than tear it out, so we price those options side by side.
Block Ranches, Villas and the US 41 and Cortez Road Corridors
South Bradenton counted 26,858 residents in 2020, up from about 22,000 a decade earlier. It sits between the City of Bradenton to the north and west, Bayshore Gardens to the south and West Samoset to the east, with US 41 running through it and Cortez Road ending at US 41 here. Housing is mostly modest and practical: concrete-block ranch homes from the 1950s through the 1970s, villa and condo complexes, and manufactured-home communities along the main corridors.

Kitchens in these homes are usually compact, and many are original or one remodel old. Typical trouble at this age includes sagging doors, worn hinges, drawer bottoms that have dropped out and a sink base softened by years of slow leaks. Because block walls and slab floors stay solid, the cabinets are often the only part that needs work, which is why refacing or replacing one damaged section makes sense here more often than a full tear-out.
The population skews older, too: 24.8 percent of residents were 65 or over at the 2020 Census, against a median age of 44.7. That shapes the brief for many kitchens here, with full-extension drawers in place of deep lower shelves, pull-outs in blind corners and wall cabinets hung low enough to reach without a step stool.
From Lewis Ave Up US 41: Measure, Model, Build, Install
The process is the same whether you need one cabinet or a whole kitchen. First we measure and inspect the existing boxes, since refacing only works on sound ones. Next come working drawings and a 3D model, so you can compare refacing, repair and new cabinets before deciding. Doors, fronts, replacement boxes or full cabinets are then built in our shop from hardwood, and we install them and touch up the finish on site.


Refacing, Repair and Kitchen Remodeling for South Bradenton, FL
These services fit the size and age of most South Bradenton kitchens, from a single fix to a complete replacement.

Cabinet Refacing
New doors, drawer fronts and veneer over sound boxes, a practical update for 1960s and 1970s block-home kitchens that already work. Masonry walls and slab floors tend to keep those boxes square, which refacing depends on.

Cabinet Repair
One swollen sink base or broken drawer replaced with a matching hardwood section instead of a whole new kitchen. It suits the original mid-century kitchens here where every other cabinet is still sound.

Kitchen Remodeling
A full remodel when the layout itself is the problem, with licensed plumbers and electricians handling any moved lines under a county permit, such as opening a compact galley to the dining room.

Custom Cabinetry
Solid-wood cabinets for villas and ranch homes where particleboard replacements from an earlier remodel have already failed, built to each room's measurements for small kitchens where every inch of storage counts.

Cabinet Painting
A fresh painted finish for sound wood cabinets when the doors and layout are still fine. Older ranch kitchens here often have solid wood doors under dated stain, good candidates for a sprayed finish.

Accessible Kitchen Design
With about a quarter of South Bradenton residents 65 or older, drawer bases, pull-down shelves and lower work surfaces help owners stay in the block homes and villas they already know.
Manatee County Permits, Not City Hall: What That Means Here
Because South Bradenton is unincorporated, any remodel permit comes from Manatee County's Development Services department rather than the City of Bradenton. Refacing and cabinet repair leave plumbing and wiring alone; relocating a sink, running new circuits or removing a wall means licensed trades and a county permit pulled by a licensed contractor.
Since November 2025 the county's in-person permit counter has been at its East Campus, 9000 Town Center Parkway in Lakewood Ranch, after leaving the downtown office on Manatee Avenue West, and applications also run through the county's Accela online portal. The 2020 Census counted 14,721 housing units on South Bradenton's 4.5 square miles of land, a dense mix in which villa and condo associations add their own rules on work hours and contractor parking.

The same county process covers neighboring Bayshore Gardens and West Samoset, while homes across the line in Bradenton go to the city. Before we quote, we confirm the jurisdiction from the property address, which avoids a surprise once trade work is scheduled.
Reviews
What customers near South Bradenton say
4.4★ average from 52 reviews on Google. Quotes are from public Google reviews, shortened where marked.
“We recently had a remodel done in our home in which all the custom cabinetry was beautifully done by SRQ Woodworks Co. Graham made cabinets for our kitchen, feature wall, dining room, and powder room. The quality is amazing and we are so happy with the wonderful attention to detail!”
“No fancy showroom. No pretentious anything. Just evidence of a working shop that builds and repairs cabinetry & furniture and that does a wide variety of other work involving wood and engineered wood alternatives. Everything they've done for me has been top notch.”
FAQ
South Bradenton kitchen remodeling questions
Do you serve South Bradenton for kitchen remodeling?
Yes. South Bradenton is about 20 minutes from our Lewis Ave shop, and we handle everything from single-cabinet repairs to full kitchens there. Every project starts with a site measure, followed by drawings and a 3D rendering, a hardwood shop build and installation. Permits, when needed, go through Manatee County.
How does refacing compare in cost with new cabinets in South Bradenton?
Refacing usually costs less because the boxes, countertops and plumbing stay in place; you pay for new doors, drawer fronts and veneer. New cabinets cost more but let you change the layout and fix failed boxes. In compact block-home kitchens with sturdy boxes, refacing is often the better value; we price both from the same measure so you can compare.
Can you repair or replace one damaged cabinet section in South Bradenton?
Yes. A swollen sink base or a broken drawer stack can be replaced on its own. We build the new box to the old dimensions in hardwood and match the door profile and finish as closely as the wood allows. If a leak caused the damage, have a licensed plumber fix the source before the new section goes in.
Is a permit required for cabinet work in South Bradenton?
Refacing and same-spot cabinet replacement leave plumbing and wiring untouched, and Manatee County decides whether that work needs a permit. Moving a sink, adding outlets or removing a wall does need a county permit, pulled by a licensed contractor, with licensed trades doing that part of the work alongside our installation.
Nearby
Also serving near South Bradenton
- West Samoset, FLAbout 20 min (11 mi) from the shop
- Bayshore Gardens, FLAbout 20 min (9 mi) from the shop
- Bradenton, FLAbout 25 min (14 mi) from the shop
- Samoset, FLAbout 20 min (12 mi) from the shop
- West Bradenton, FLAbout 25 min (16 mi) from the shop
1121 Lewis Ave, Sarasota
About a quarter mile east of US 301, off 12th Street. Shop visits are by appointment. Please call ahead before stopping by Lewis Ave.
Living Well Crafted
Planning a kitchen in South Bradenton? Talk it through with the shop.
- Built in our Sarasota shop since 2011
- 4.4★ from 52 Google reviews
- 3D model before anything is built
- Solid-wood boxes, dovetail drawers
